3 Phase Digital Hybrid Stepper Motor Driver Stepping Motor Driver

We are one of the leading manufacturers and suppliers of 3 phase digital hybrid stepper motor driver stepping motor driver in China, and we are able to offer you customized 3 phase hybrid stepper motor driver, 3 phase hybrid stepping motor driver made in China. Welcome to contact our factory. ...

Product details

We are one of the leading manufacturers and suppliers of 3 phase digital hybrid stepper motor driver stepping motor driver in China, and we are able to offer you customized 3 phase hybrid stepper motor driver, 3 phase hybrid stepping motor driver made in China. Welcome to contact our factory.

3 Phase Digital stepper motor driver JK3DM860

Overview

The JK3DM860 is a new generation high-performance digital stepper driver based on DSP with advanced control algorithm. The motors driven by JK3DM860D can run with much smaller noise and much less vibration than other drivers in the market. The JK3DM860D possess the feature of lower noise, lower vibration, and lower heating. The JK3DM860D’s voltage is DC 24V-80V. It is suitable for all the 3-phase hybrid stepper motor whose current is less than 6.0A. There are 16 kinds of microstep of JK3DM860D.  The maximum step number of JK3DM860 is 40000 steps/rev. Its current range is 2.4A-7.2A, and its output current has 8 stalls. JK3DM860 has automatic semi-flow, over-voltage, under voltage and over-current protection function.

Current selection

REF

Peak

SW1

SW2

SW3

2.00A

2.40A

ON

ON

ON

2.57A

3.08A

OFF

ON

ON

3.14A

3.77A

ON

OFF

ON

3.71A

4.45A

OFF

OFF

ON

4.28A

5.14A

ON

ON

OFF

4.86A

5.83A

OFF

ON

OFF

5.43A

6.52A

ON

OFF

OFF

6.00A

7.20A

OFF

OFF

OFF

Microstep selection

Pulse/REV

SW5

SW6

SW7

SW8

Default

ON

ON

ON

ON

800

OFF

ON

ON

ON

1600

ON

OFF

ON

ON

3200

OFF

OFF

ON

ON

6400

ON

ON

OFF

ON

12800

OFF

ON

OFF

ON

25600

ON

OFF

OFF

ON

51200

OFF

OFF

OFF

ON

1000

ON

ON

ON

OFF

2000

OFF

ON

ON

OFF

4000

ON

OFF

ON

OFF

5000

OFF

OFF

ON

OFF

8000

ON

ON

OFF

OFF

10000

OFF

ON

OFF

OFF

20000

ON

OFF

OFF

OFF

40000

OFF

OFF

OFF

OFF

Default: The pulse can be customized according to customers’ requirements.  

Common indicator

Phenomenon

Reason

Solution


The red indicator is on.

1. A short circuit of motor wires.

Inspect or change wires

2. The external voltage is    over or low than the driver’s working voltage.

Adjust the voltage to a reasonable rang

3. Unknown reason

Return the goods

Driver functions descriptions

Driver function Operating instructions

Output current setting

Users can set the driver output current by SW1-SW3 three switches. The setting of the specific output current, please refer to the instructions of the driver panel figure.

Microstep setting

Users can set the driver Microstep by the SW5-SW8 four switches. The setting of the specific Microstep subdivision, please refer to the instructions of the driver panel figure.

 

Automatic half current 

  function

Users can set the driver half flow function by SW4. "OFF" indicates the quiescent current is set to half of the dynamic current, that is to say, 0.5 seconds after the cessation of the pulse, current reduce to about half automatically. "ON" indicates the quiescent current and the dynamic current are the same. User can set SW4 to "OFF", in order to reduce motor and driver heating and improve reliability.


Signal 

  interfaces

PUL+ and PUL- are the positive and negative side of control pulse signal; DIR+ and DIR- are the positive and negative side of direction signal; ENA+ and ENA- are the positive and negative side of enable signal.

 

Motor interfaces

U, V, W are connected to winding of motor. If you need to backward, any 2 wires can be reversed.

 Power 

  interfaces

It uses DC power supply. Recommended operating voltage is 24VDC-80VDC, and power consumption should be greater than 350W.

 

Indicator lights

There are two indicator lights. Power indicator is green. When the driver power on, the green light will always be lit. Fault indicator is red, when there is over-voltage or over-current fault, the red light will always be lit; after the driver fault is cleared, if re-power the red light will be off.

Installation 

instructions

Driver dimensions:150×98×51mm, please refer to dimensions diagram. Please leave 10CM space for heat dissipation. During installation, it should be close to the metal cabinet for heat dissipation.


3 Phase Digital stepper motor driver OE3DM683

Overview

The OE3DM683 is a new generation high-performance digital stepper driver based on DSP with advanced control algorithm. The motors driven by OE3DM683 can run with much smaller noise and much less vibration than other drivers in the market. The OE3DM683 possess the feature of lower noise, lower vibration, and lower heating. The OE3DM683’s voltage is DC 24V-60V. It is suitable for all the 3-phase hybrid stepper motor whose current is less than 5.6A.There are 16 kinds of microstep of OE3DM683.  The maximum step number of OE3DM683 is 51200 steps/rev (microstep is 1/256 ). Its current range is 3.2A-8.3A, and its output current has 8 stalls. 3DM683 has automatic semi-flow, over-voltage, under voltage and over-current protection function.

Current selection

Peak

RMS

SW1

SW2

SW3

Default

OFF

OFF

OFF

3.2A

2.3A

ON

OFF

OFF

4.0A

2.9A

OFF

ON

OFF

4.9A

3.5A

ON

ON

OFF

5.7A

4.1A

OFF

OFF

ON

6.4A

4.6A

ON

OFF

ON

7.3A

5.2A

OFF

ON

ON

8.3A

5.9A

ON

ON

ON

Microstep selection

Pulse/Rev

SW5

SW6

SW7

SW8

Default

ON

ON

ON

ON

800

OFF

ON

ON

ON

1600

ON

OFF

ON

ON

3200

OFF

OFF

ON

ON

6400

ON

ON

OFF

ON

12800

OFF

ON

OFF

ON

25600

ON

OFF

OFF

ON

51200

OFF

OFF

OFF

ON

1000

ON

ON

ON

OFF

2000

OFF

ON

ON

OFF

4000

ON

OFF

ON

OFF

5000

OFF

OFF

ON

OFF

8000

ON

ON

OFF

OFF

10000

OF

ON

OFF

OFF

20000

ON

OFF

OFF

OFF

40000

OFF

OFF

OFF

OFF

Default: The pulse can be customized according to customers’ requirements.
Common indicator

Phenomenon Reason Solution


The red indicator is on.

1. A short circuit of motor wires.

Inspect or change wires

2. The external voltage is over or low than the driver’s working voltage.

Adjust the voltage to a reasonable rang

3. Unknown reason

Return the goods

Applications
It can be applied  in a variety of small scale automation equipment and instruments, such as labeling machine, cutting machine, packing machine, drawing machine, engraving  machine, CNC machine and so on. It always performs well when it is used in  equipment which requires for low-vibration, low-noise, high-precision and  high-velocity.
Driver functions descriptions

Driver function

Operating instructions

Output
current
setting

Users can set the driver output current by SW1-SW3 three switches.
The setting of the specific output current, please refer to the instructions of the driver panel figure.

Microstep setting

Users can set the driver Microstep by the SW5-SW8 four switches. The setting of the specific Microstep subdivision, please refer to the instructions of the driver panel figure.

 

Automatic half
 current function

Users can set the driver half flow function by SW4. "OFF" indicates the quiescent current is set to half of the dynamic current, that is to say, 0.5 seconds after the cessation of the pulse, current reduce to about half automatically. "ON" indicates the quiescent current and the dynamic current are the same. User can set SW4 to "OFF", in order to reduce motor and driver heating and improve reliability.

 

Signal interfaces

PUL+ and PUL- are the positive and negative side of control pulse signal; DIR+ and DIR- are the positive and negative side of direction signal; ENA+ and ENA- are the positive and negative side of enable signal.

 

Motor interfaces

A+ and A- are connected to a phase winding of motor; B+ and B- are connected to another phase winding of motor. If you need to backward, one of the phase windings can be reversed.

 

Power interfaces

It uses DC power supply. Recommended operating voltage is 24VDC-60VDC, and power consumption should be greater than 100W.

 

Indicator lights

There are two indicator lights. Power indicator is green. When the driver power on, the green light will always be lit. Fault indicator is red, when there is over-voltage or over-current fault, the red light will always be lit; after the driver fault is cleared, if re-power the red light will be off.

 

Installation
instructions

Driver dimensions:118×75×32mm, please refer to dimensions diagram. Please leave 10CM space for heat dissipation. During installation, it should be close to the metal cabinet for heat dissipation.


Related Products
Feedback

Our Service

We are committed to for telecom operators, such as businesses and consumers to provide competitive ICT solutions and services, and continuously improving customer experience...

Feedback

Contact Us

Address:22F-C1 No.49 Zhongshan South RD Nanjing, Jiangsu, China

Tel: +86-13770335830

Fax: +86-25-85547320

E-mail: babycatpy@163.com

CopyRight© Oemotor Electric Co.,Limited

Oemotor Electric Co.,Limited