News

Home > News > Content

Hybrid Stepper Motor Driver Drive System

Oemotor Electric Co.,Limited | Updated: Aug 31, 2017

Hybrid Stepper Motor Driver Drive System

The first step is the stepper motor and the hybrid stepper motor drive to form the stepper motor drive system, which is the performance of the stepper motor drive system, which depends not only on the performance of the stepper motor itself but also on Mixed stepper motor driver of the pros and cons, and they are synchronized between the work.

At the same time, the stepper motor is an actuator that converts the electronic pulse signal into an angular displacement, so when the hybrid stepper motor driver receives the pulse signal, it is necessary to drive the stepper motor at this time, To turn to a fixed angle, its rotation is to this

A fixed angle step by step to the rotation of the.

 There is a stepper motor can not directly to the DC or AC power above to work, it must go to use a dedicated drive power so that you can go to the controller, you can control the number of pulses to control the system Angle displacement, and this way can be decided to achieve the purpose of accurate positioning, so that at the same time can be controlled by the pulse frequency to control the speed of motor rotation acceleration and deceleration, so as to achieve the purpose of speed.

 This is the relationship between them, together constitute the drive system, but can also be used alone.

In fact, stepper motor he belongs to the control class of the motor, the normal case is not suitable to run high speed, why? Mainly because at high speed when its working torque will become smaller, so that the ability to drive the load It will be greatly reduced, so the proposed step

 Into the motor using a reasonable speed range of 9-900rpm but can not be too low, why? Because too low will cause resonance, so that the speed is too high, the torque will become smaller, there is If the stepper motor is running at high speed, it will also produce a whistle, but this does not mean that the stepper motor can no longer drive at high speed, if the stepper motor in a 3000RPm and higher than this speed Time is no problem can also go to the operation, the key point is that he can not drive your load to turn.


Feedback

Contact Us

Address:22F-C1 No.49 Zhongshan South RD Nanjing, Jiangsu, China

Tel: +86-13770335830

Fax: +86-25-85547320

E-mail: babycatpy@163.com

CopyRight© Oemotor Electric Co.,Limited